Agilent Technologies 35670A Manual page 209

Dynamic signal analyzer gpib programming

Hide thumbs Also See for 35670A:

Table of Contents

CALCulate[1|2|3|4]:SYNThesis:COPY

Copies the contents of the curve fit table into the synthesis table.

Command Syntax:

Example Statements:

Attribute Summary:

Description:

This command overwrites the synthesis table with the contents of the curve fit table. You cannot recover

the contents of the previous synthesis table after sending this command.

The analyzer does not copy "engineering units." Use the CALC:SYNT:GAIN command to simulate

engineering units with synthesis.

This command is not trace specific. It ignores the trace specifier.

CALCulate[1|2|3|4]:SYNThesis:COPY CFIT

OUTPUT 711;":CALC:SYNTHESIS:COPY CFIT"

OUTPUT 711;"calc:synthesis:copy CFIT"

1D3 Curve Fit/Synthesis

Synchronization Required:

Preset State:

not applicable

SCPI Compliance:

instrument-specific