Agilent Technologies 35670A Manual page 143

CALCulate[1|2|3|4]:LIMit:LOWer:CLEar[:IMMediate]
Deletes the lower limit line from the specified display.
Command Syntax:
Example Statements:
Attribute Summary:
Description:
To delete a lower limit line, send CALC:LIM:LOW:CLE. To delete an upper limit, send
CALC:LIM:UPP:CLE.
You can delete part of a limit line if it consists of segments. See the CALC:LIM:LOW:SEGM:CLE
command for information about deleting a segment of the lower limit line.
CALCulate[1|2|3|4]:LIMit:LOWer:CLEar[:IMMediate]
OUTPUT 711;":CALC4:LIMIT:LOW:CLE"
OUTPUT 711;"calculate:lim:lower:cle:imm"
Option: not applicable
Synchronization Required:
Preset State: not applicable
SCPI Compliance:
no
instrument-specific
CALCulate
command
6-35