Agilent Technologies 35670A Manual page 449

Dynamic signal analyzer gpib programming

Hide thumbs Also See for 35670A:

Table of Contents

[SENSe:]AVERage:PREView:TIME

Specifies the amount of time the analyzer waits for a response in timed preview averaging.

Command Syntax:

<number> ::= a real number (NRf data)

<unit> ::= [S]

<step> ::= UP|DOWN

<bound> ::= MAX|MIN

Example Statements:

Query Syntax:

Return Format:

Attribute Summary:

Description:

The analyzer waits the specified amount of time for a response. If a response is not sent, the analyzer

accepts the time record.

Time is specified in seconds. Specify timed preview averaging with the AVER:PREV TIM command.

[SENSe:]AVERage:PREView:TIME {<number>[<unit>]}|<step>|

OUTPUT 711;":aver:prev:time 20"

OUTPUT 711;"SENS:AVERAGE:PREVIEW:TIME 60 S"

[SENSe:]AVERage:PREView:TIME?

not applicable

Synchronization Required:

Preset State:

SCPI Compliance:

instrument-specific

command/query