Calculate[1|2|3|4]:Math[:Expression[1|2|3|4|5]]Command/Query - Agilent Technologies 35670A Manual

Dynamic signal analyzer gpib programming

Hide thumbs Also See for 35670A:

Table of Contents

You can transfer measurement data from the analyzer with either the TRAC:DATA

command or the CALC:DATA command. However, you can only transfer data to the

analyzer with the TRAC:DATA command.

The CALCulate mnemonic contains an optional trace specifier: [1|2|3|4]. To direct a command to trace

A, omit the specifier or use 1. To direct a command to trace B, use 2; to trace C, use 3; and to trace D,

use 4. Commands that are not trace-specific—the CALC:MATH commands, the CALC:CFIT commands

and the CALC:SYNT commands—ignore the specifier.