[SENSe:]
[SENSE:]DATA:HEADer:FREQuency:STARt?
Returns the start frequency setting used for the current time-capture buffer.
Query Syntax:
Example Statements:
Return Format:
Description:
This command is used to determine the start frequency used when the data in the current time-capture
buffer was captured.
If the value returned by this query is non-zero, the capture data returned by the SENSE:DATA? query
will be complex.
The time-capture start and stop frequency can be used to calculate the time spacing between the capture
data points. The spacing is equal to 400 / ((Stop frequency) − (Start frequency)).
18-22
[SENSe:]DATA:HEADer:FREQuency:STARt?
OUTPUT 711;"SENSE:DATA:HEAD:FREQ:START?"
Real
Attribute Summary:
Option: not applicable
Synchronization Required: no
Preset state: 0
SCPI Compliance: instrument-specific
query