Agilent Technologies 35670A Manual page 465

Dynamic signal analyzer gpib programming

Hide thumbs Also See for 35670A:

Table of Contents

[SENSe:]FREQuency:BLOCksize

Specifies the number of real-time data points displayed on the analyzer's screen.

Command Syntax:

<number> ::= a real number (NRf data)

<step> ::= UP|DOWN

<bound> ::= MAX|MIN

Example Statements:

Query Syntax:

Return Format:

Attribute Summary:

Description:

This command sets the number of points in a time record for FFT and correlation instrument modes.

In FFT analysis instrument mode (INST:SEL FFT) the number of frequency-data points depends upon the

blocksize. See table 18-2. This command is similar to the FREQuency:RESolution command which

specifies the resolution with frequency lines.

In correlation analysis instrument mode (INST:SEL CORR) the number of displayed time-data points

depends upon the blocksize. See table 18-2.

[SENSe:]FREQuency:BLOCksize <number>|<step>|<bound>

OUTPUT 711;":FREQUENCY:BLOCK 512"

OUTPUT 711;"sens:freq:bloc 1024"

[SENSe:]FREQuency:BLOCksize?

not applicable

Synchronization Required:

Preset State:

not applicable

SCPI Compliance:

instrument-specific

command/query