Instrument Messages; Error Messages - Agilent Technologies PSA Series Manual

Instrument Messages

Instrument Messages
Instrument Messages

Error Messages

NOTE Error numbers are displayed in the error queue, not on the display.
To see an error number, press
0: No Error
0
No error
The queue is empty. Either every error in the queue has been read, or the
queue was cleared by power-on or *CLS.
−499 to −400: Query Errors
NOTE Error numbers are displayed in the error queue, not on the display.
To see an error number, press
–440
Query UNTERMINATED after indefinite response
Indicates that a query was received in the same program message after a
query requesting an indefinite response was executed (see IEEE 488.2,
6.3.7.5).
–430
Query DEADLOCKED
Indicates that a condition causing a DEADLOCKED query error occurred
(see IEEE 488.2, 6.3.1.7). For example, both the input buffer and the
output buffer are full and the analyzer cannot continue. The analyzer
automatically discards output to correct the deadlock.
–420
Query UNTERMINATED
Indicates that a condition causing an UNTERMINATED query error
occurred (see IEEE 488.2, 6.3.2.2). For example, the device was addressed
to talk and an incomplete program message was received.
–410
Query INTERRUPTED
Indicates that a condition causing an INTERRUPTED query error
occurred (see IEEE 488.2, 6.3.2.7). For example, a query was followed by
DAB or GET before a response was completely sent.
38
, .
System Show Errors
, .
System Show Errors
Chapter 1