Agilent Technologies 35670A Manual page 424

PROGram
PROGram:EDIT:ENABle
Disables the Instrument BASIC editor.
Command Syntax:
Example Statements:
Query Syntax:
Return Format:
Attribute Summary:
Description:
This command disables and enables the Instrument BASIC edit menus. The edit menus are enabled when
the analyzer is turned on.
To prevent access to the edit menus, send the PROG:EDIT:ENAB OFF command. The [EDIT] softkey is
ghosted on the front panel display. An execution error is generated if the [EDIT] softkey is pressed while
it is disabled. The message "The Instrument BASIC editor has been disabled." is displayed.
To enable the Instrument BASIC editor, send PROG:EDIT:ENAB ON.
17-2
PROGram:EDIT:ENABle OFF|0|ON|1
OUTPUT 711;"prog:edit:enab 1"
OUTPUT 711;"PROG:EDIT:ENABLE OFF"
PROGram:EDIT:ENABle?
Integer
Option: 1C2 Instrument BASIC
Synchronization Required:
Preset State: not affected by Preset
SCPI Compliance:
no
instrument-specific
command/query