Agilent Technologies 35670A Manual page 278

DISPlay
DISPlay[:WINDow[1|2|3|4]]:TRACe:APOWer[:STATe]
Turns on or off the display of the A-weight overall band.
Command Syntax:
Example Statements:
Query Syntax:
Return Format:
Attribute Summary:
Description:
If the input channel A-weight filter is on (INPut:FILTer:AWEighting ON), it is applied for the overall
band. This command enables the display of the A-weighted overall band.
WINDow[1|2|3|4] specifies the trace box. Send WIND1 to specify A, WIND2 to specify B, WIND3 to
specify C, and WIND4 to specify D. If you do not send the optional trace box specifier, the command
defaults to trace box A.
To display the overall band without the A-weight filter applied to the overall band, see the
DISPlay:WINDow:TRACe:BPOWer:STATe command.
8-24
DISPlay[:WINDow[1|2|3|4]]:TRACe:APOWer[:STATe] OFF|0|ON|1
OUTPUT 711;":display:trac:apow OFF"
OUTPUT 711;"Display:Wind4:Trace:Apow:Stat OFF"
DISPlay[:WINDow[1|2|3|4]]:TRACe:APOWer[:STATe]?
Integer
Option: 1D1 Realtime Octave
Synchronization Required:
Preset State: OFF (+0)
SCPI Compliance:
no
instrument-specific
command/query