Agilent Technologies 35670A Manual page 344

Dynamic signal analyzer gpib programming

Hide thumbs Also See for 35670A:

Table of Contents

INITiate:CONTinuous

Sets the trigger system to a continuously initiated state.

Command Syntax:

Example Statements:

Query Syntax:

Return Format:

Attribute Summary:

Description:

INIT:CONT OFF suspends the measurement process. It "pauses" the current measurement immediately.

The analyzer discards the time record that is currently being processed.

INIT:CONT ON restarts a "paused" measurement. It also allows you to add more data to the running

average of a completed measurement. For example, if the analyzer has completed a 10-average

measurement and you send INIT CONT ON, 10 more records are averaged with the old data, bringing the

total number of averages to 20.

INIT:CONT ON is not valid if you pause a measurement and change the measurement parameters. It is

also not valid, if a calibration occurs while a measurement is paused. You must use the INIT[:IMM]

command to start a paused measurement after calibration or after changing the measurement parameters.

After *RST, INIT:CONT is set to OFF (+0).

INITiate:CONTinuous OFF|0|ON|1

OUTPUT 711;"Init:Cont OFF"

OUTPUT 711;"INITIATE:CONT OFF"

INITiate:CONTinuous?

not applicable

Synchronization Required:

Preset State:

SCPI Compliance:

command/query