Agilent Technologies 35670A Manual page 625

TRACe:WATerfall[:DATA]
Stores data to the specified waterfall register.
Command Syntax:
<WDATA> ::= W1|W2|W3|W4|W5|W6|W7|W8
<number> ::= <integer>
Example Statements:
Query Syntax:
Return Format:
If FORMat[:DATA] REAL:
<DEF_BLOCK> ::= #<byte><length_bytes> <1st_axis>
<byte> ::= one byte specifying the number of
<length_bytes> ::= number of data bytes to follow
If FORMat[:DATA] ASCii:
<DEF_BLOCK> ::= <1st_value>
Attribute Summary:
Description:
This command copies a waterfall display into one of eight waterfall registers, transfers block data to a
specified waterfall register and copies data between waterfall registers. The waterfall display must
contain more than 1 trace.
The first parameter specifies the destination. The second parameter specifies the data or the source of the
data:
one of the trace boxes; A (TRAC1), B (TRAC2), C (TRAC3), or D (TRAC4)
data to be loaded from one of the waterfall data registers
See table 23-1 on page 23-3 for the types of data.
TRACe:WATerfall[:DATA] {W1|W2|W3|W4|W5|W6|W7|W8}, <WDATA>
::= TRACe1|TRACe2|TRACe3|TRACe4
::= <BLOCK> (definite and indefinite length)
::= <number>,<number>,<number> . . .
::= <floating-point numeric>
OUTPUT 711;":TRACE:WAT W6, WDATA"
OUTPUT 711;"trac:waterfall:data W7, WDATA"
TRACe:WATerfall[:DATA]?
<DEF_BLOCK>
[. . .<last_value>]
to follow (ASCII encoded)
[. . .<last_value>]
Option: not applicable
Synchronization Required:
Preset State: not applicable
SCPI Compliance:
(ASCII encoded)
no
confirmed
command/query
length bytes
TRACe
23-5