Agilent Technologies 35670A Manual page 231

Dynamic signal analyzer gpib programming

Hide thumbs Also See for 35670A:

Table of Contents

CALCulate[1|2|3|4]:UNIT:X:ORDer:FACTor

Specifies the speed of rotation in Hertz per Order or RPM per Order.

Command Syntax:

<number> ::= a real number (NRf data)

<unit> ::= [HZ/ORD|RPM/ORD]

<step> ::= UP|DOWN

<bound> ::= MAX|MIN

Example Statements:

Query Syntax:

Return Format:

Attribute Summary:

Description:

Use this command to specify the speed of rotation when specifying orders (or revolutions for time domain

traces) as the X-axis unit (CALC:UNIT:X 'ORD').

The trace specifier, CALCulate[1|2|3|4], determines which trace you are selecting. Omit the specifier or

send 1 for trace A, 2 for trace B, 3 for trace C, or 4 for trace D.

To determine the unit, send CALC:UNIT:X:ORD:FACT? UNIT.

CALCulate[1|2|3|4]:UNIT:X:ORDer:FACTor {<num-

ber>[<unit>]}|<step>|<bound>

OUTPUT 711;"CALC:UNIT:X:ORD:FACT 600 RPM/ORD"

OUTPUT 711;"calc3:unit:x:order:factor 10 hz/ord"

CALCulate[1|2|3|4]:UNIT:X:ORDer:FACTor?

not applicable

Synchronization Required:

Preset State:

SCPI Compliance:

instrument-specific

command/query