Agilent Technologies 35670A Manual page 393

Dynamic signal analyzer gpib programming

Hide thumbs Also See for 35670A:

Table of Contents

MMEMory:LOAD:TCAPture

Loads a time capture file from the specified disk.

Command Syntax:

<FILENAME> ::= '[<PATH>]<filename>'

<PATH> ::= <MSIS>[{DOS_DIR}]

<MSIS> ::= RAM:|NVRAM:|INT:|

<DOS_DIR> ::= \<DIR_NAME>\

<DIR_NAME> ::= ASCII characters

<filename> ::= ASCII characters (see beginning of chapter

Example Statements:

Attribute Summary:

Description:

This command loads the contents of a file into the time capture buffer. The file must have been saved

with the MMEM:STOR:TCAP command. To display the time capture buffer use the CALC:FEED

'TCAP[1|2|3|4]' command.

Use the MMEM:LOAD:CONT if the file is saved on multiple disks. See the MMEM:LOAD:CONT

command for more information about loading split files on multiple disks.

MMEMory:LOAD:TCAPture <FILENAME>

EXT[,<select_code>[,<unit _number>]]:

for <filename> restrictions)

OUTPUT 711;"MMEM:LOAD:TCAPTURE, 'MYTIME'"

OUTPUT 711;"mmem:load:tcap, 'int:tcap1'"

not applicable

Synchronization Required:

Preset State:

not applicable

SCPI Compliance:

instrument-specific