Agilent Technologies 35670A Manual page 535

Dynamic signal analyzer gpib programming

Hide thumbs Also See for 35670A:

Table of Contents

SOURce:FREQuency[:CW]

Sets the frequency of the sine source.

Command Syntax:

<number> ::= a real number (NRf data)

<unit> ::= [HZ]

<step> ::= UP|DOWN

<bound> ::= MAX|MIN

Example Statements:

Query Syntax:

Return Format:

Attribute Summary:

Description:

This command sets the frequency of the fixed sine source type. To select a fixed sine source output, use

the SOUR:FUNC SIN command.

The allowable range is 0 to 115 kHz. The frequency may be set to 15.625 mHz increments.

This is an alias for the SCPI command SOURce:FREQuency:FIXed.

SOURce:FREQuency[:CW] {<number>[<unit>]}|<step>|<bound>

0.0:115000.0

OUTPUT 711;"sour:freq 1 khz"

OUTPUT 711;"SOURCE:FREQUENCY:CW 12000"

SOURce:FREQuency[:CW]?

not applicable

Synchronization Required:

Preset State:

SCPI Compliance:

command/query