Agilent Technologies 35670A Manual page 540

SOURce
SOURce:USER:REPeat
Enables the source repeat function.
Command Syntax:
Example Statements:
Query Syntax:
Return Format:
Attribute Summary:
Description:
To output the arbitrary source data only during data collection of the measurement, send
SOURCE:REPEAT OFF. One "waveform" is present in each measurement record.
To output the arbitrary source data continuously, send SOURCE:USER:REPEAT ON. The source
"repeats" the arbitrary waveform. This is the selection at Preset.
Note
This command has no effect when the analyzer is in free run trigger mode (TRIG:SOUR
IMM).
19-8
SOURce:USER:REPeat OFF|0|ON|1
OUTPUT 711;"Sour:User:Repeat OFF"
OUTPUT 711;"SOUR:USER:REP ON"
SOURce:USER:REPeat?
Integer
Option: 1D4 Arbitrary Source
Synchronization Required:
Preset State: ON (+1)
SCPI Compliance:
no
instrument-specific
command/query