Agilent Technologies 35670A Manual page 402

MMEMory
MMEMory:STORe:DTABle:TRACe[1|2|3|4]
Saves the specified data table to a file on the specified disk.
Command Syntax:
<FILENAME> ::= '[<PATH>]<filename>'
<PATH> ::= <MSIS>[{DOS_DIR}]
<MSIS> ::= RAM:|NVRAM:|INT:|
<DOS_DIR> ::= \<DIR_NAME>\
<DIR_NAME> ::= ASCII characters
<filename> ::= ASCII characters (see beginning of chapter
Example Statements:
Attribute Summary:
Description:
The trace specifier selects which data table you are saving—TRAC1 for the data table appearing in trace
box A, TRAC2 for the data table appearing in trace box B, TRAC3 for the data table appearing in trace
box C, TRAC4 for the data table appearing in trace box D. The parameter specifies the disk and
filename. If the disk is not specified, the file is saved to the default disk.
If the filename you specify matches the name of another file on the disk, this command overwrites the old
file.
Note
If you plan to transfer this file to a PC, refer to the Standard Data Format Utilities Users
Guide.
15-28
MMEMory:STORe:DTABle:TRACe1|2|3|4}, <FILENAME>
EXT[,<select_code>[,<unit _number>]]:
(DOS only)
for <filename> restrictions)
OUTPUT 711;"mmem:stor:dtab:trac2, 'int:testdtab'"
OUTPUT 711;"MMEM:STORE:DTAB:TRAC1, 'MYTABLE'"
Option: not applicable
Synchronization Required:
Preset State: not applicable
SCPI Compliance:
no
instrument-specific
command