Agilent Technologies 35670A Manual page 455

Dynamic signal analyzer gpib programming

Hide thumbs Also See for 35670A:

Table of Contents

[SENSe:]AVERage:TIME

Specify the time period used in averaging octave measurements and histograms.

Command Syntax:

<number> ::= a real number (NRf data)

<unit> ::= [S|REC|PNT]

<step> ::= UP|DOWN

<bound> ::= MAX|MIN

Example Statements:

Query Syntax:

Return Format:

Attribute Summary:

Description:

This command is only valid in histogram instrument mode (INST:SEL HIST) and

octave analysis instrument mode (INST:SEL OCT; Option 1D1).

In octave analysis instrument mode (INST:SEL OCT):

The specified amount of time (in seconds) is used in linear and exponential averaging. It is also used in

the peak hold function.

In linear averaging (AVER:TYPE RMS), the value is used for linear integration time. In exponential

averaging (AVER:TYPE RMS;TCON EXP), the value is used as the time constant.

In peak hold (AVER:TYPE MAX), this value is used as the integration time over which to hold

maximum values. The termination control (AVER:TCON) must be FREeze.

[SENSe:]AVERage:TIME {<number>[<unit>]}|<step>|<bound>

OUTPUT 711;":average:time 3.77454e+36"

OUTPUT 711;"Sens:Average:Time 3.72708e+37"

[SENSe:]AVERage:TIME?

not applicable

Synchronization Required:

Preset State:

.125 S (INST:SEL OCT)

1 REC (INST:SEL HIST)

SCPI Compliance:

instrument-specific

command/query