Agilent Technologies 35670A Manual page 174

CALCulate[1|2|3|4]:MARKer:FUNCtion
Selects one of the analyzer's marker functions.
Command Syntax:
Example Statements:
Query Syntax:
Return Format:
Attribute Summary:
Description:
This command selects the marker function; send CALCulate:MARKer:FUNCtion:RESult? to read marker
values.
To turn off the marker function, send CALC:MARK:FUNC OFF.
Marker functions depend on the type of measurement data. See table 6-4 for a listing of marker functions
for each instrument mode. To define the range of the calculation, use the CALC:MARK:BAND
commands.
The following marker functions are available for frequency data:
To select the harmonic power function, send CALC:MARK:FUNC HPOW.
To select the total harmonic distortion function, send CALC:MARK:FUNC THD.
To select the band power function, send CALC:MARK:FUNC BPOW.
To select the square root of the band power function, send CALC:MARK:FUNC BRMS.
To select the sideband power function, send CALC:MARK:FUNC SPOW.
CALCulate[1|2|3|4]:MARKer:FUNCtion OFF|0|HPOWer|THD|
BPOWer|BRMS|SPOWer|OVERshoot|RTIMe|STIMe|DTIMe|SSLevel|
GMARgin|PMARgin|GCRossover|PCRossover|FREQuency|DAMPing|
SINFo|WEIGht|TPOWer|WPOWer
OUTPUT 711;":calc:marker:func OVERSHOOT"
OUTPUT 711;"Calculate:Mark:Func TPOWER"
CALCulate[1|2|3|4]:MARKer:FUNCtion?
OFF|HPOW|THD|BPOW|BRMS|SPOW|OVER|RTIM|STIM|DTIM|SSL|GMAR
|PMAR|GCR|PCR| FREQ|DAMP|SINF|WEIG|TPOW|WPOW
Option: not applicable
Synchronization Required:
Preset State: not applicable
SCPI Compliance:
no
instrument-specific
CALCulate
command/query
6-66