Agilent Technologies 35670A Manual page 520

[SENSe:]
[SENSe:]VOLTage[1|2|3|4][:DC]:RANGe:UNIT:USER:LABel
Assigns a name to the transducer units for the specified input channel when
VOLT:RANG:UNIT:XDCR:LABel is USER.
Command Syntax:
<STRING> ::= ASCII characters - 32 through 126
Example Statements:
Query Syntax:
Return Format:
Attribute Summary:
Description:
The label appears only when the VOLT:RANG:UNIT:XDCR command is sent with the USER parameter.
If the channel specifier is not used, the command defaults to channel 1.
The query returns the last-entered transducer unit name for the specified channel.
Note
Only use this command if the label you want is not one of the
VOLT:RANG:UNIT:XDCR:LABel parameters.
18-82
[SENSe:]VOLTage:RANGe:UNIT:USER:LABel '<STRING>'
maximum number of characters:
OUTPUT 711;"SENSE:VOLT2:RANG:UNIT:USER:LABEL 'watt'"
OUTPUT 711;"volt:rang:unit:user:lab 'Cdeg'"
[SENSe:]VOLTage[1|2|3|4][:DC]:RANGe:UNIT:USER:LABel?
STRING
Option: not applicable
Synchronization Required:
Preset State: EU
SCPI Compliance:
4
no
instrument-specific
command/query