Agilent Technologies 35670A Manual page 649

Dynamic signal analyzer gpib programming

Hide thumbs Also See for 35670A:

Table of Contents

TRIGger:TACHometer:SLOPe

Specifies the slope of the tachometer input signal to be used in RPM step arming or order tracking.

Command Syntax:

Example Statements:

Query Syntax:

Return Format:

Attribute Summary:

Description:

To specify a rising slope (low-to-high transition), send TRIG:TACH:SLOP POS.

To specify a falling slope (high-to-low transition), send TRIG:TACH:SLOP NEG.

The query returns the currently-specified slope.

See the ARM:SOURce commands for additional information about RPM step arming. See the

[SENSe:]ORD commands for additional information about order tracking.

TRIGger:TACHometer:SLOPe POSitive|NEGative

OUTPUT 711;"trig:tachometer:slop NEGATIVE"

OUTPUT 711;"Trigger:Tach:Slop NEGATIVE"

TRIGger:TACHometer:SLOPe?

not applicable

Synchronization Required:

Preset State:

SCPI Compliance:

instrument-specific

command/query