Agilent Technologies 35670A Manual page 526

Dynamic signal analyzer gpib programming

Hide thumbs Also See for 35670A:

Table of Contents

[SENSe:]WINDow[1|2|3|4]:FORCe

Specifies the width of the force window.

Command Syntax:

<number> ::= a real number (NRf data)

<unit> ::= [S]

<step> ::= UP|DOWN

<bound> ::= MAX|MIN

Example Statements:

Query Syntax:

Return Format:

Attribute Summary:

Description:

This command specifies the length of the force window in seconds.

The force window passes the first part of the time record (specified by the length of the width of the force

window) and sets the remaining part to the average value of the time record's remaining data. The data is

then multiplied by the exponential windowing function.

The channel specifier, WINDow[1|2|3|4], is ignored. The force width is applied to all channels.

The first point in the time record is always considered to be time t=0.

[SENSe:]WINDow[1|2|3|4]:FORCe {<number>[<unit>]}|<step>|

3.8147E-6:9.9999E6

OUTPUT 711;":WINDOW:FORCE 0.1 s"

OUTPUT 711;"SENS:WIND:FORC 2 ms"

[SENSe:]WINDow[1|2|3|4]:FORCe?

not applicable

Synchronization Required:

Preset State:

+9.999E+003 S

SCPI Compliance:

command/query