Agilent Technologies 35670A Manual page 244

Dynamic signal analyzer gpib programming

Hide thumbs Also See for 35670A:

Table of Contents

CALCulate[1|2|3|4]:WATerfall:TRACe:SELect

Selects a waterfall trace by its Z-axis value.

Command Syntax:

<number> ::= a real number (NRf data)

<unit> ::= [S|RPM|COUNT|AVG]

<step> ::= UP|DOWN

<bound> ::= MAX|MIN

Example Statements:

Query Syntax:

Return Format:

Attribute Summary:

Description:

This command selects a waterfall trace by its Z-axis value. The Z-axis value indicates when the

measurement data was armed.

To specify a waterfall trace in trace box A, send CALC1; in trace box B, send CALC2; in trace box C,

send CALC3; and in trace box D, send CALC4. The trace specifier defaults to trace box A if the specifier

is not used.

See the CALC:WAT:TRAC:COPY command for information about copying a selected trace to a data

CALCulate[1|2|3|4]:WATerfall:TRACe:SELect {<number>

[<unit>]}|<step>|<bound>

-9.9e37:9.9e37

OUTPUT 711;"calculate:wat:trace:sel 10 count"

OUTPUT 711;"CALC3:WAT:TRAC:SEL 3.5 S"

CALCulate[1|2|3|4]:WATerfall:TRACe:SELect?

not applicable

Synchronization Required:

Preset State:

SCPI Compliance:

instrument-specific

command/query