Agilent Technologies 35670A Manual page 673

Dynamic signal analyzer gpib programming

Hide thumbs Also See for 35670A:

Table of Contents

This section lists analyzer hardkeys and softkeys and their equivalent GPIB commands.

Softkeys are indented to indicate their position in the menu tree. Keys that do not have an equivalent

GPIB command are excluded from the list. Keys which appear in multiple menus may appear only once.

For example, time capture is available in most instrument modes and appears in multiple Measurement

Data hardkey menus. The GPIB command for time capture is only listed once.

Multiple GPIB commands may be required for a single softkey. In these cases, the entire command string

is listed. The command string includes valid parameter values.

You can also determine the equivalent GPIB command for any key sequence by turning on the GPIB

echo facility. With GPIB echo on, the analyzer displays the equivalent GPIB command for each front

panel key sequence. To turn on GPIB echo, press the following keys:

[ Local/GPIB ]

] to highlight ON.