Agilent Technologies 35670A Manual page 391

Dynamic signal analyzer gpib programming

Hide thumbs Also See for 35670A:

Table of Contents

MMEMory:LOAD:STATe

Loads an instrument state into the analyzer from the specified disk.

Command Syntax:

<number> ::= a real number (NRf data)

<bound> ::= MAX|MIN

<FILENAME> ::= '[<PATH>]<filename>'

<PATH> ::= <MSIS>[{DOS_DIR}]

<MSIS> ::= RAM:|NVRAM:|INT:|

<DOS_DIR> ::= \<DIR_NAME>\

<DIR_NAME> ::= ASCII characters

<filename> ::= ASCII characters (see beginning of chapter

Example Statements:

Attribute Summary:

Description:

This command uses the contents of a file to redefine the instrument state. The file must have been saved

with the MMEM:STOR:STAT command.

MMEMory:LOAD:STATE <number>|<bound>, <FILENAME>

EXT[,<select_code>[,<unit _number>]]:

for <filename> restrictions)

OUTPUT 711;"MMEM:LOAD:STAT 1, 'INT:STATE.STA'"

OUTPUT 711;"mmemory:load:state 1, 'ext:mystate'"

not applicable

Synchronization Required:

Preset State:

not applicable

SCPI Compliance: