Agilent Technologies 35670A Manual page 175

CALCulate
The following marker functions are available for frequency response data
(CALC:FEED 'XFR:POW:RAT [2,1|3,1|4,1|4,3]'):
To select the gain margin power function, send CALC:MARK:FUNC GMAR.
To select the phase margin power function, send CALC:MARK:FUNC PMAR.
To select the gain crossover function, send CALC:MARK:FUNC GCR.
To select the phase crossover power function, send CALC:MARK:FUNC PCR.
To select the resonant frequency, send CALC:MARK:FUNC FREQ.
To select the damping function, send CALC:MARK:FUNC DAMP.
The following marker functions are available for time data (CALC:FEED
'XTIM:VOLT[1|2|3|4]'.
To select the delay time function, send CALC:MARK:FUNC DTIM.
To select the maximum overshoot function, send CALC:MARK:FUNC OVER.
To select the rise time function, send CALC:MARK:FUNC RTIM.
To select the settling time function, send CALC:MARK:FUNC STIM.
To select the steady state level function, send CALC:MARK:FUNC SSL.
In correlation analysis instrument mode (INST:SEL CORR), the following marker functions are
available:
To select the delay time function, send CALC:MARK:FUNC DTIM.
To select the maximum overshoot function, send CALC:MARK:FUNC OVER.
To select the rise time function, send CALC:MARK:FUNC RTIM.
To select the settling time function, send CALC:MARK:FUNC STIM.
To select the steady state level function, send CALC:MARK:FUNC SSL.
6-67