Agilent Technologies 35670A Manual page 295

Dynamic signal analyzer gpib programming

Hide thumbs Also See for 35670A:

Table of Contents

DISPlay[:WINDow[1|2|3|4]]:TRACe:Y[:SCALe]:TOP

Specifies the value of the top reference point of the display's Y-axis scale.

Command Syntax:

<number> ::= a real number (NRf data)

<unit> ::= [DBVRMS|VRMS|VPK|DBVPK|V|DBV|EU|DBEU]

<step> ::= UP|DOWN

<bound> ::= MAX|MIN

Example Statements:

Query Syntax:

Return Format:

Attribute Summary:

Description:

This command defines the top of a display's Y-axis scale. Specifying the height of the vertical division

of the trace (DISP:TRAC:Y:PDIV) after using this command changes the center and bottom points of the

display. The top point remains fixed. When you send this command, the analyzer automatically sets

DISP:WIND:TRAC:Y:REF to TOP.

The trace specifier, WINDow [1|2|3|4], determines which trace you are selecting. Omit the specifier or

send WIND1 for trace A, WIND2 for B, WIND3 for C, or WIND4 for D.

See "Determining Units" in appendix E for information about available Y-axis units.

DISPlay[:WINDow[1|2|3|4]]:TRACe:Y[:SCALe]:TOP {<num-

ber>[<unit>]}|<step>|<bound>

-9.9e37:9.9e37

OUTPUT 711;"DISPLAY:WIND4:TRAC:Y:SCAL:TOP 5.0"

OUTPUT 711;"disp:trac:y:top 0.0"

DISPlay[:WINDow[1|2|3|4]]:TRACe:Y[:SCALe]:TOP?

not applicable

Synchronization Required:

Preset State:

not applicable

SCPI Compliance:

command/query