Agilent Technologies 35670A Manual page 218

CALCulate
CALCulate[1|2|3|4]:SYNThesis:TTYPe
Converts the synthesis table to another table format.
Command Syntax:
Example Statements:
Query Syntax:
Return Format:
Attribute Summary:
Description:
To convert the synthesis table to pole-zero format, send CALC:SYNT:TTYP PZER.
To convert the synthesis table to partial-fraction format, send CALC:SYNT:TTYP PFR. This format is
identified as pole-residue in the table.
To convert the synthesis table to polynomial format, send CALC:SYNT:TTYP POLY.
The analyzer ignores this command if the table already exists in the specified format.
Note
Table conversions between formats are not allowed if the table data represents a non-Hermitian
symmetric system. Hermitian symmetry is most easily defined in the polynomial table format: all
numerator and denominator coefficients must be real.
This command is not trace specific. It ignores the trace specifier.
6-110
CALCulate[1|2|3|4]:SYNThesis:TTYPe PZERo|PFRaction|POLY-
nomial
OUTPUT 711;":calc2:synt:ttype PZERO"
OUTPUT 711;"Calc:Synthesis:Ttyp POLYNOMIAL"
CALCulate[1|2|3|4]:SYNThesis:TTYPe?
PZER|PFR|POLY
Option: 1D3 Curve Fit/Synthesis
Synchronization Required:
Preset State: PZER
SCPI Compliance:
no
instrument-specific
command/query