Agilent Technologies 35670A Manual page 559

STATus:OPERation:CONDition?
Reads the Operation Status condition register.
Query Syntax:
Example Statements:
Return Format:
Attribute Summary:
Description:
This query returns the sum of the decimal weights of all bits currently set to 1 in the Operation Status
condition register. (The decimal weight of a bit is 2
See "Operation Status Register Set" in chapter 1 for a definition of bits in the register set. See
"Programming the Status System" in the GPIB Programmer's Guide for information about the role
of condition registers in register sets.
STATus:OPERation:CONDition?
OUTPUT 711;":Stat:Operation:Cond?"
OUTPUT 711;"STAT:OPERATION:COND?"
Integer
Option: not applicable
Synchronization Required:
Preset State: not applicable
SCPI Compliance:
no
confirmed
n , where n is the bit number.)
STATus
query
20-7