Agilent Technologies 35670A Manual page 434

PROGram
PROGram[:SELected]:STATe
Selects the state of the active Instrument BASIC program.
Command Syntax:
Example Statements:
Query Syntax:
Return Format:
Attribute Summary:
Description:
This command allows you to run, pause, stop or continue the active Instrument BASIC program.
The analyzer generates an error message, "Settings conflict; Invalid program state change requested," if
you send RUN or CONT while a program is running. It also generates the error if you send CONT while
a program is stopped.
Use the PROG:NAME command to select the active program.
17-12
PROGram[:SELected]:STATe STOP|PAUSe|RUN|CONTinue
OUTPUT 711;":PROG:STATE CONTINUE"
OUTPUT 711;"prog:selected:stat RUN"
PROGram[:SELected]:STATe?
STOP|PAUS|RUN|CONT
Option: 1C2 Instrument BASIC
Synchronization Required:
Preset State: not affected by Preset
SCPI Compliance:
no
confirmed
command/query