Agilent Technologies 35670A Manual page 245

Dynamic signal analyzer gpib programming

Hide thumbs Also See for 35670A:

Table of Contents

CALCulate[1|2|3|4]:WATerfall:TRACe:SELect:POINt

Selects a waterfall trace by its step value.

Command Syntax:

<number> ::= a real number (NRf data)

<step> ::= UP|DOWN

<bound> ::= MAX|MIN

Example Statements:

Query Syntax:

Return Format:

Attribute Summary:

Description:

This command selects a waterfall trace by its step value. The total number of waterfall steps is specified

with the CALC:WAT:COUNt command.

A value of 1 specifies the first trace collected for the waterfall display. A value of 2 specifies the second

trace collected for the waterfall display.

To specify a waterfall trace in trace box A, send CALC1; in trace box B, send CALC2; in trace box C,

send CALC3; and in trace box D, send CALC4. The trace specifier defaults to trace box A if the specifier

is not used.

See the CALC:WAT:TRAC:COPY command for information about copying a selected trace to a data

CALCulate[1|2|3|4]:WATerfall:TRACe:SELect:POINt <number>

|<step>|<bound>

OUTPUT 711;"CALC4:WATERFALL:TRAC:SELECT:POIN 4104"

OUTPUT 711;"calc4:waterfall:trac:select:poin 15879"

CALCulate[1|2|3|4]:WATerfall:TRACe:SELect:POINt?

not applicable

Synchronization Required:

Preset State:

not applicable

SCPI Compliance:

instrument-specific

command/query