Agilent Technologies 35670A Manual page 516

Dynamic signal analyzer gpib programming

Hide thumbs Also See for 35670A:

Table of Contents

[SENSe:]TCAPture:TACHometer[:STATe]

Directs the analyzer to include the tachometer input signal in the time capture buffer.

Command Syntax:

Example Statements:

Query Syntax:

Return Format:

Attribute Summary:

Description:

This command determines if the tachometer input signal is included in the time capture buffer.

The tachometer parameters must be setup before capturing the data. See the TCAP:TACH:RPM:MAX

and TRIGger:TACHometer commands for more information.

This command is not required for order analysis (INST:SEL ORD; Option 1D0). The

analyzer's tachometer is always ON in order analysis instrument mode.

[SENSe:]TCAPture:TACHometer[:STATe] OFF|0|ON|1

OUTPUT 711;"Sens:Tcapture:Tach:Stat OFF"

OUTPUT 711;"TCAPTURE:TACH ON"

[SENSe:]TCAPture:TACHometer[:STATe]?

not applicable

Synchronization Required:

Preset State:

SCPI Compliance:

instrument-specific

command/query