Agilent Technologies 35670A Manual page 497

Dynamic signal analyzer gpib programming

Hide thumbs Also See for 35670A:

Table of Contents

[SENSe:]REJect:STATe

Turns overload rejection on or off.

Command Syntax:

Example Statements:

Query Syntax:

Return Format:

Attribute Summary:

Description:

If overload rejection is off (the default condition), all time records are included in the measurement.

If SENS:REJ ON is sent, the time record from the overloaded input channel is not included in the

measurement results. The concurrent time record from the other channel is rejected as well. The

measurement continues until the analyzer has collected the specified number of non-overloaded time

[SENSe:]REJect:STATe OFF|0|ON|1

OUTPUT 711;":rej:stat ON"

OUTPUT 711;"Sense:Rej:State ON"

[SENSe:]REJect:STATe?

not applicable

Synchronization Required:

Preset State:

SCPI Compliance:

instrument-specific

command/query