Agilent Technologies 35670A Manual page 297

DISPlay[:WINDow[1|2|3|4]]:WATerfall:BASeline
Specifies the percentage of each trace that is concealed in the waterfall display.
Command Syntax:
<number> ::= a real number (NRf data)
<unit> ::= [PCT]
<step> ::= UP|DOWN
<bound> ::= MAX|MIN
Example Statements:
Query Syntax:
Return Format:
Attribute Summary:
Description:
This command allows you to mask a portion of each trace from the waterfall display. The percentage you
specify is applied from the baseline of the trace, up towards the peak value and simplifies the waterfall by
removing noise floor from the display.
For example, if DISP:WAT:BASE is 33, the lower third of the trace—from the baseline to 33 percent of
the amplitude of the trace height—is suppressed. See the DISPlay:WATerfall:HEIGht command for more
information.
WINDow[1|2|3|4] specifies the trace box. Send WIND1 to specify A, WIND2 to specify B, WIND3 to
specify C, and WIND4 to specify D. If you do not send the optional trace box specifier, the command
defaults to trace box A.
DISPlay[:WINDow[1|2|3|4]]:WATerfall:BASeline {<num-
ber>[<unit>]}|<step>|<bound>
limits: 0:100
OUTPUT 711;"disp:wat:bas 30"
OUTPUT 711;":display:wind3:waterfall:baseline 33"
DISPlay[:WINDow[1|2|3|4]]:WATerfall:BASeline?
Integer
Option: not applicable
Synchronization Required:
Preset State: +0
SCPI Compliance:
no
instrument-specific
DISPlay
command/query
8-43