Agilent Technologies 35670A Manual page 176

CALCulate
In octave analysis instrument mode (INST:SEL OCT; Option 1D1) the following marker functions are
available:
To select the band power function, send CALC:MARK:FUNC BPOW.
To select the square root of the band power function, send CALC:MARK:FUNC BRMS.
To select the overall band, send CALC:MARK:FUNC TPOW.
To select the weighted overall band, send CALC:MARK:FUNC WPOW.
In order analysis instrument mode (INST:SEL ORD; Option 1D0) the following marker functions are
available:
To select the harmonic power function, send CALC:MARK:FUNC HPOW.
To select the total harmonic distortion function, send CALC:MARK:FUNC THD.
To select the band power function, send CALC:MARK:FUNC BPOW.
To select the square root of the band power function, send CALC:MARK:FUNC BRMS.
To select the sideband power function, send CALC:MARK:FUNC SPOW.
In histogram analysis instrument mode (INST:SEL HIST) the following marker functions are available
for unfiltered time data (CALC:FEED 'XTIM:VOLT [1|2|3|4]'):
To select the delay time function, send CALC:MARK:FUNC DTIM.
To select the maximum overshoot function, send CALC:MARK:FUNC OVER.
To select the rise time function, send CALC:MARK:FUNC RTIM.
To select the settling time function, send CALC:MARK:FUNC STIM.
To select the steady state level function, send CALC:MARK:FUNC SSL.
Note
Marker functions are not available for following types of trace data:
Nyquist diagram (CALC:FORM NYQ)
Polar diagram (CALC:FORM POL)
Orbit diagram (CALC:FEED 'XVOL:VOLT [1,2|1,3|1,4|3,4]')
6-68