Agilent Technologies 35670A Manual page 645

Dynamic signal analyzer gpib programming

Hide thumbs Also See for 35670A:

Table of Contents

TRIGger:TACHometer:LEVel

Specifies the level of the tachometer's input signal which causes the analyzer to trigger.

Command Syntax:

<number> ::= a real number (NRf data)

<unit> ::= [V]

<step> ::= UP|DOWN

<bound> ::= MAX|MIN

Example Statements:

Query Syntax:

Return Format:

Attribute Summary:

Description:

The ±4 volt range has 0.0393 V resolution. The ±20 volt range has 0.197 V resolution.

See the ARM:SOURce commands for additional information about RPM step arming. See the

[SENSe:]ORD commands for additional information about order tracking.

TRIGger:TACHometer:LEVel {<num-

ber>[<unit>]}|<step>|<bound>

-20.0:+20.0 V (if TRIG:TACH:RANG HIGH)

-4.0:+4.0 V (if TRIG:TACH:RANG LOW)

OUTPUT 711;"trig:tach:lev 300mv"

OUTPUT711;"TRIGGER:TACHOMETER:LEVEL 2.5"

TRIGger:TACHometer:LEVel?

not applicable

Synchronization Required:

Preset State:

SCPI Compliance:

instrument-specific

command/query