Agilent Technologies 35670A Manual page 541

Dynamic signal analyzer gpib programming

Hide thumbs Also See for 35670A:

Table of Contents

SOURce:VOLTage[:LEVel]:AUTO

Enables the autolevel feature in swept sine measurements (INST:SEL SINE).$Isource;autolevel

Command Syntax:

Example Statements:

Query Syntax:

Return Format:

Attribute Summary:

Description:

If autolevel is enabled with the SOUR:VOLT:AUTO ON command, the analyzer adjusts the source

output level to keep the amplitude of an input channel within a specified range.

See the following commands for additional information about setting the range:

SOURce:VOLTage:LIMit[:AMPLitude]

SOURce:VOLTage:LIMit:INPut

SOURce:VOLTage[:LEVel]:REFerence

SOURce:VOLTage[:LEVel]:REFerence:CHANnel

SOURce:VOLTage[:LEVel]:REFerence:TOLerance

To turn off the autolevel function, send SOUR:VOLT:AUTO OFF.

Refer to Online Help for detailed information about the autolevel feature.

SOURce:VOLTage[:LEVel]:AUTO OFF|0|ON|1

OUTPUT 711;":sour:voltage:auto OFF"

OUTPUT 711;"Source:Volt:Lev:Auto ON"

SOURce:VOLTage[:LEVel]:AUTO?

1D2 Swept Sine

Synchronization Required:

Preset State:

SCPI Compliance:

instrument-specific

command/query