Agilent Technologies 35670A Manual page 527

[SENSe:]WINDow[1|2|3|4]:ORDer:DC
Directs the analyzer to include the DC bin in the composite power calculation (order track
measurements).
Command Syntax:
Example Statements:
Query Syntax:
Return Format:
Attribute Summary:
Description:
The composite power calculation (CALC:FEED 'XFR:POW:COMP') sums the power of the order
spectrum at each RPM step.
To exclude the power of the order spectrum in the DC bin, send WIND:ORD:DC OFF.
The first bin is excluded from the composite power calculation if the measurement is using a uniform
windowing function (WINDow:TYPE UNIF).
The first two bins are excluded from the calculation if the measurement is using a Hann window
(WINDow:TYPE HANN).
The first five bins are excluded from the calculation if the measurement is using a flattop window
(WINDow:TYPE FLAT).
Note
This command is not channel specific. It ignores the channel specifier.
[SENSe:]WINDow[1|2|3|4]:ORDer:DC OFF|0|ON|1
OUTPUT 711;":WIND:ORD:DC OFF
OUTPUT 711;"window:order:dc 1"
[SENSe:]WINDow[1|2|3|4]:ORDer:DC?
Integer
Option: 1D0 Computed Order Tracking
Synchronization Required:
Preset State: ON (+1)
SCPI Compliance:
no
instrument-specific
[SENSe:]
command/query
18-89