Agilent Technologies 35670A Manual page 173

Dynamic signal analyzer gpib programming

Hide thumbs Also See for 35670A:

Table of Contents

CALCulate[1|2|3|4]:MARKer:DTABle:X:SELect[:POINt]

Selects the data table entry.

Command Syntax:

<number> ::= a real number (NRf data)

<step> ::= UP|DOWN

<bound> ::= MAX|MIN

Example Statements:

Query Syntax:

Return Format:

Attribute Summary:

Description:

This command selects the entry in the data table. Use it to direct the action of the following commands:

CALC:MARK:DTAB:X:CHANGe

CALC:MARK:DTAB:X:DELete

CALC:MARK:DTAB:X:INSert

CALC:MARK:DTAB:X:LABel

CALCulate[1|2|3|4] specifies the data table. Send CALC1 to specify the data table appearing in trace box

A, CALC2 to specify B, CALC3 to specify C, and CALC4 to specify D. If you do not send the optional

specifier, the command defaults to the data table appearing in trace box A.

To display the data table, use the DISPlay[:WINDow[1|2|3|4]]:DTABle[:STATe] command.

CALCulate[1|2|3|4]:MARKer:DTABle:X:SELect[:POINt] <num-

ber>|<step>|<bound>

OUTPUT 711;"Calc:Mark:Dtable:X:Select:Poin 23"

OUTPUT 711;"CALC:MARKER:DTAB:X:SEL 32"

CALCulate[1|2|3|4]:MARKer:DTABle:X:SELect[:POINt]?

not applicable

Synchronization Required:

Preset State:

not applicable

SCPI Compliance:

instrument-specific

command/query