Agilent Technologies 35670A Manual page 198

CALCulate
CALCulate[1|2|3|4]:MARKer:X[:ABSolute]
Specifies the main marker's X-axis position.
Command Syntax:
<number> ::= a real number (NRf data)
<unit> ::= [HZ|S|ORD|COUNT|AVG|V|VPK|RPM|EU|REV]
<step> ::= UP|DOWN
<bound> ::= MAX|MIN
Example Statements:
Query Syntax:
Return Format:
Attribute Summary:
Description:
This command specifies the main marker's X-axis position. Send CALC:MARK:X? UNIT to determine
the units for the X-axis.
To specify the main marker's X-axis position by display point number, use the
CALC:MARK:POSition:POINt command.
To specify the main marker's independent axis position for orbits, Nyquist diagrams and polar diagrams,
send the CALC:MARK:POSition command.
Note
You can not move the main marker beyond the maximum displayed X-axis value nor
below the minimum displayed X-axis value.
In octave analysis instrument mode (INST:SEL OCT), CALC:MARK:X MAX moves the main marker to
the far right band.
6-90
CALCulate[1|2|3|4]:MARKer:X[:ABSolute] {<num-
ber>[<unit>]}|<step>|<bound>
limits: -9.9e37:9.9e37
OUTPUT 711;"Calculate3:Mark:X:Abs 7.75161e+37"
OUTPUT 711;"CALC4:MARKER:X -3.56784e+35"
CALCulate[1|2|3|4]:MARKer:X[:ABSolute]?
Real
Option: not applicable
Synchronization Required:
Preset State: +0.0
SCPI Compliance:
no
instrument-specific
command/query