Agilent Technologies 35670A Manual page 546

Dynamic signal analyzer gpib programming

Hide thumbs Also See for 35670A:

Table of Contents

SOURce:VOLTage[:LEVel]:REFerence:TOLerance

Specifies the sensitivity of the autolevel algorithm in swept sine measurements (INST:SEL SINE).

Command Syntax:

<number> ::= a real number (NRf data)

<unit> ::= [DB]

<step> ::= UP|DOWN

<bound> ::= MAX|MIN

Example Statements:

Query Syntax:

Return Format:

Attribute Summary:

Description:

This command sets a tolerance band (in dB) for the autolevel algorithm.

If the amplitude of the reference input channel falls outside of the specified range (relative to the value set

with the SOUR:VOLT[:LEV]:REF command), the analyzer adjusts the amplitude of the source output

when SOUR:VOLT:AUTO ON.

SOURce:VOLTage[:LEVel]:REFerence:TOLerance {<number>

[<unit>]}|<step>|<bound>

OUTPUT 711;"sour:volt:level:ref:tolerance 4.38485"

OUTPUT 711;"Sour:Volt:Reference:Tol 6.80982"

SOURce:VOLTage[:LEVel]:REFerence:TOLerance?

1D2 Swept Sine

Synchronization Required:

Preset State:

SCPI Compliance:

instrument-specific

command/query