Agilent Technologies 35670A Manual page 330

HCOPy
HCOPy:ITEM[:WINDow[1|2|3|4]]:TRACe:LIMit:LTYPe
Selects the line type for the specified limit line.
Command Syntax:
<n> ::= a real number
Example Statements:
Query Syntax:
Return Format:
Attribute Summary:
Description:
The limit specifier determines which trace-limit line you are selecting. Omit the specifier or send 1 for
trace A limit lines; send 2 for trace B limit lines; send 3 for trace C limit lines; send 4 for trace D limit
lines.
The color of the limit line is set with the HCOP:ITEM:WIND:TRAC:MARK:COL command.
The STYLe<n> parameter values choose a line type <n>. Check your plotter's documentation to see if it
supports additional line types. The numerical representation of the line type can be appended to STYLe to
select that line type.
10-16
HCOPy:ITEM[:WINDow[1|2|3|4]]:TRACe:LIMit
SOLid|DASHed|DOTTed|STYLe<n>
limits: 0, 3-12
OUTPUT 711;"HCOP:ITEM:TRAC:LIM:LTYP DASH"
OUTPUT 711;"hcopy:item:window4:trace:limit:ltype dotted"
HCOPy:ITEM[:WINDow[1|2|3|4]]:TRACe:LIMit:LTYPe?
SOL|DASH|DOTT|STYL<n>
Option: not applicable
Synchronization Required:
Preset State: DOTT (all traces)
SCPI Compliance:
no
instrument-specific
command/query