Agilent Technologies 35670A Manual page 192

Dynamic signal analyzer gpib programming

Hide thumbs Also See for 35670A:

Table of Contents

CALCulate[1|2|3|4]:MARKer:REFerence:X

Specifies the marker reference X-axis position.

Command Syntax:

<number> ::= a real number (NRf data)

<unit> ::= [HZ|S|ORD|COUNT|AVG|V|VPK|RPM|EU|REV]

<step> ::= UP|DOWN

<bound> ::= MAX|MIN

Example Statements:

Query Syntax:

Return Format:

Attribute Summary:

Description:

This command specifies the absolute X-axis position for the reference marker.

To specify the marker reference X-axis position relative to the main marker's position, use the

CALC:MARK:X:REL command.

CALCulate[1|2|3|4]:MARKer:REFerence:X {<number>[<unit>]}|

-9.9e37:9.9e37

OUTPUT 711;":Calc4:Marker:Ref:X 1.8207e+37"

OUTPUT 711;"CALC:MARK:REFERENCE:X -5.84172e+37"

CALCulate[1|2|3|4]:MARKer:REFerence:X?

not applicable

Synchronization Required:

Preset State:

SCPI Compliance:

instrument-specific

command/query