Agilent Technologies 35670A Manual page 236

Dynamic signal analyzer gpib programming

Hide thumbs Also See for 35670A:

Table of Contents

CALCulate[1|2|3|4]:WATerfall:COUNt

Specifies the number of traces stored for waterfall displays.

Command Syntax:

<number> ::= a real number (NRf data)

<step> ::= UP|DOWN

<bound> ::= MAX|MIN

Example Statements:

Query Syntax:

Return Format:

Attribute Summary:

Description:

This command determines the total capacity of waterfall displays. The capacity of a waterfall display is

determined by the number of complete measurements that are stored in memory. This in turn, determines

the number of traces that appear in a waterfall display.

When you change instrument modes or start a new measurement with the ABOR;:INIT command, all

current waterfall traces are lost.

The maximum number of traces stored for a waterfall display is dependent upon the

amount of available memory.This command ignores the trace specifier.

For more information, see online help for the [WATERFALL STEPS] softkey.

CALCulate[1|2|3|4]:WATerfall:COUNt <num-

ber>|<step>|<bound>

OUTPUT 711;":calculate:waterfall:count 50"

OUTPUT 711;"CALC2:WAT:COUN 32"

CALCulate[1|2|3|4]:WATerfall:COUNt?

not applicable

Synchronization Required:

Preset State:

SCPI Compliance:

instrument-specific

command/query