Agilent Technologies 35670A Manual page 302

DISPlay
DISPlay[:WINDow[1|2|3|4]]:WATerfall:SKEW
Enables a skewed waterfall display.
Command Syntax:
Example Statements:
Query Syntax:
Return Format:
Attribute Summary:
Description:
Send DISPlay:WATerfall:SKEW ON to enable a skewed waterfall display. Each trace added to the
display is offset along the horizontal axis as well as the vertical axis. The amount of horizontal offset is
determined by the DISPlay:WATerfall:SKEW:ANGLe command.
Send DISPlay:WATerfall:SKEW OFF to enable a vertical waterfall display. The offset is only on the
vertical axis. This is the default waterfall display.
WINDow[1|2|3|4] specifies the trace box. Send WIND1 to specify A, WIND2 to specify B, WIND3 to
specify C, and WIND4 to specify D. If you do not send the optional trace box specifier, the command
defaults to trace box A.
8-48
DISPlay[:WINDow[1|2|3|4]]:WATerfall:SKEW OFF|0|ON|1
OUTPUT 711;"display:wind3:waterfall:skew on"
OUTPUT 711;"DISP:WAT:SKEW OFF"
DISPlay[:WINDow[1|2|3|4]]:WATerfall:SKEW?
Integer
Option: not applicable
Synchronization Required:
Preset State: OFF (+0)
SCPI Compliance:
no
instrument-specific
command/query