Agilent Technologies 35670A Manual page 500

Dynamic signal analyzer gpib programming

Hide thumbs Also See for 35670A:

Table of Contents

[SENSe:]SWEep:MODE

Specifies automatic or manual sweep modes.

Command Syntax:

Example Statements:

Query Syntax:

Return Format:

Attribute Summary:

Description:

To select automatic sweep mode, send SWE:MODE AUTO. The instrument controls the sweep

according to the following parameters:

FREQ:RESolution

SWE:DIRection

The values of the parameters are specified by default or by the appropriate command.

Send SWE:MODE MAN to select a discrete sweep; the measurement occurs only at the frequency points

specified by the [SENSe:]FREQ:MANual command.

[SENSe:]SWEep:MODE AUTO|MANual

OUTPUT 711;":Swe:Mode AUTO"

OUTPUT 711;"SENSE:SWE:MODE AUTO"

[SENSe:]SWEep:MODE?

Synchronization Required:

Preset State:

SCPI Compliance:

command/query