Agilent Technologies 35670A Manual page 169

CALCulate[1|2|3|4]:MARKer:DTABle:X[:DATA]?
Returns the X values in the specified data table.
Query Syntax:
Example Statements:
Return Format:
When data is ASCII-encoded, (FORMat ASCii) <DEF_BLOCK> takes the following form:
<DEF_BLOCK> ::= [<X value>,<X value> . . .]
When data is binary-encoded, (FORMat REAL) <DEF_BLOCK> takes the following form:
<DEF_BLOCK> ::= #<byte><length_bytes>[<X value>, <X value> . . .]
<byte> ::= one ASCII-encoded byte specifying the
<length_bytes> ::= ASCII-encoded bytes specifying
The following definitions apply to both ASCII- and binary-encoded data.
<X value> ::= a real number
Attribute Summary:
Description:
CALCulate[1|2|3|4] specifies the data table. Send CALC1 to specify the data table appearing in trace box
A, CALC2 to specify B, CALC3 to specify C, and CALC4 to specify D. If you do not send the optional
specifier, the command defaults to the data table appearing in trace box A.
Use the command "CALC:MARK:X? UNIT" to determine the unit.
CALCulate[1|2|3|4]:MARKer:DTABle:X[:DATA]?
OUTPUT 711;":Calc4:Marker:Dtab:X?"
OUTPUT 711;"CALC:MARK:DTABLE:X:DATA?"
<DEF_BLOCK>
length bytes to follow
data bytes to follow
limits: -9.9e+37 : 9.9e+37
Option: not applicable
Synchronization Required:
Preset State: not applicable
SCPI Compliance:
the number of
no
instrument-specific
CALCulate
query
number of
6-61