[SENSe:]
[SENSe:]TCAPture:ABORt
Stops the time capture process.
Command Syntax:
Example Statements:
Attribute Summary:
Description:
The amount of data in the time capture buffer is less than the amount specified by the TCAP:LENG
command. The analyzer aborts the time capture process immediately. Any partial time record is discard.
18-68
[SENSe:]TCAPture:ABORt
OUTPUT 711;"Sens:Tcap:Abort"
OUTPUT 711;"TCAP:ABORT"
Option:
not applicable
Synchronization Required:
Preset State:
not applicable
SCPI Compliance:
no
instrument-specific
command