Agilent Technologies 35670A Manual page 627

Dynamic signal analyzer gpib programming

Hide thumbs Also See for 35670A:

Table of Contents

TRACe:X[:DATA]?

Returns the X-axis data for trace displays.

Query Syntax:

Example Statements:

Return Format:

If FORMat[:DATA] REAL:

<DEF_BLOCK> ::= #<byte><length_bytes> <1st_axis>

<byte> ::= one byte specifying the number of

<length_bytes> ::= number of data bytes to follow

If FORMat[:DATA] ASCii:

<DEF_BLOCK> ::= <1st_X- axis_value>

Attribute Summary:

Description:

This query returns the values along the X-axis for any display. The values identify each bin in the trace.

Alias data is included in frequency domain data. Table 23-2 (page 23-44) specifies

which data points are alias-protected and which data points are not protected. The

number of points is determined by the lines of resolution set with the

[SENSe:]FREQuency:RESolution command.

To determine the units for the X-axis send TRAC:X:UNIT?.

TRACe:X[:DATA]?

TRACe1|TRACe2|TRACe3|TRACe4|D1|D2|D3|D4|D5|D6|D7|D8|W1|W2

|W3|W4|W5|W6|W7|W8

OUTPUT 711;"Trace:X:Data? TRACE4"

OUTPUT 711;"TRACE:X? W3"

[. . .<last_value>]

to follow (ASCII encoded)

[. . .<last_X-axis_value>]

not applicable

Synchronization Required:

Preset State:

not applicable

SCPI Compliance:

(ASCII encoded)

instrument-specific

length bytes