Agilent Technologies 35670A Manual page 301

DISPlay[:WINDow[1|2|3|4]]:WATerfall:HIDDen
Turns on or off the removal of hidden waterfall traces.
Command Syntax:
Example Statements:
Query Syntax:
Return Format:
Attribute Summary:
Description:
In a waterfall display, trace segments may overlap and make it difficult to read the display. When
DISP:WAT:HID is ON (the default), the analyzer removes hidden lines—those segments of a trace which
fall behind or below the previous trace.
When DISP:WAT:HID is OFF, the analyzer displays all segments of all traces; even those obscured by
the previous trace.
WINDow[1|2|3|4] specifies the trace box. Send WIND1 to specify A, WIND2 to specify B, WIND3 to
specify C, and WIND4 to specify D. If you do not send the optional trace box specifier, the command
defaults to trace box A.
DISPlay[:WINDow[1|2|3|4]]:WATerfall:HIDDen OFF|0|ON|1
OUTPUT 711;":disp:waterfall:hidd ON"
OUTPUT 711;"Disp:Window4:Wat:Hidden ON"
DISPlay[:WINDow[1|2|3|4]]:WATerfall:HIDDen?
Integer
Option: not applicable
Synchronization Required:
Preset State: ON (+1)
SCPI Compliance:
no
instrument-specific
DISPlay
command/query
8-47