Agilent Technologies 35670A Manual page 630

TRACe
TRACe:Z:UNIT?
Returns the unit for the z-axis in waterfall displays.
Query Syntax:
Example Statements:
Return Format:
Attribute Summary:
Description:
The unit for the Z-axis is dependent upon the type of arming used to trigger the measurement.
The query returns "COUNTS" if manual trigger arming or automatic trigger arming was used. If the
measurement data is averaged and manual or automatic arming was used, the query returns "AVG".
The query returns "SEC" if time step arming was used.
The query returns "RPM" if RPM step arming was used.
To query the values along the Z-axis, send TRAC:Z?.
23-10
TRACe:Z:UNIT?
TRACe1|TRACe2|TRACe3|TRACe4|D1|D2|D3|D4|D5|D6|D7|D8|W1|W2
|W3|W4|W5|W6|W7|W8
OUTPUT 711;"TRAC:Z:UNIT? W4"
OUTPUT 711;"trace:z:unit? D7"
"COUNTS"|"AVG"|"SEC"|"RPM"
Option: not applicable
Synchronization Required:
Preset State: not applicable
SCPI Compliance:
no
instrument-specific
query